齿轮泵是导轨升降机传动的首要设备，是导轨升降机重要的组成部分，如果导轨升降机出现无力的情况，那将会影响公司完成项目的进度，那么导轨升降机齿轮泵内漏应该如何解决呢？
1、导轨升降机内漏表现为工作时噪声大、发动机转速越高，则噪声越大，在滤油器中可见到大量铜屑。应拆检齿轮泵，检测齿轮的端面间隙、齿轮的啮合间隙、齿轮的径向间隙，以及检查密封件是否良好的等。如有超差或损坏，应修复或更换。
Leakage performance lifts for big noise at work, the higher the engine speed, the greater the noise, the filter can be seen in a large number of copper scrap. Should be overhauled gear pumps, end gap detection gear backlash gears, gear radial clearance, and check the seal is good and so on. If ultra-poor or damaged, should be repaired or replaced.
2、检查导轨升降机齿轮泵的散热条件能否杰出，泵中齿轮、轴承等能否损坏，零件能否松动。如果油液蜕变或杂质增多，使泵的轴承研磨、烧蚀而发热，这种状况，除应将泵拆开清洁外，有必要替换新油。
Check the gear pump lift outstanding thermal conditions can, pump gears, bearings, etc. can damage parts can come loose. If the fluid transformation or impurities increased, so that the pump bearing grinding, erosion and heat, this situation, in addition to the pump should be disassembled to clean the outside, it is necessary to replace the new oil.
